Voopoo MAAT Subohm Tank - Review

Item Name : MAAT Subohm Tank

Manufacturer: @VOOPOO

Website: https: www.voopoo.com

Cost: Still to be launched in SA

***DISCLAIMER*** This product was supplied to me by @VOOPOO for the purpose of reviewing the product for them and providing my personal feedback and opinion of this device before launching in South Africa. I also hope to create some excitement around this device. I’m not being paid for this review and this review is my own opinion and views.

So, let’s start off with some pictures of this device, from unboxing to being used.

I apologize for this long review, but it was impossible for me to just keep it short. TL;DR : It’s a super tank!! Get one!

What’s inside the box you ask?

MAAT Tank – Bubble Glass installed.

MT-M2 Coil (0.21ohm)– Preinstalled

MT-M1 Coil – (0.13ohm) – In the box

Spare straight glass tube – 2ml capacity

O-ring set – 6 pieces

User Manual

Technical specifications are also important, so here they are:

Tank

Diameter: 28mm (TPD 24.5mm)

Height: 56mm

Weight: 76g

Material: Stainless Steel & Glass

Glass Tube : 28mm bubble and straight is 24.5mm

Capacity: 4ml (TPD 2ml)

Coils

The MAAT tank comes with two coils, one is preinstalled in the tank and the other is a spare in the box.

MT-M1 (Spare in Box)

Resistance – 0.13Ohm

Type – Single Mesh Coil

Power Range – 60-85Watt

User Experience: Great flavour and clouds but restrictive draw due to one coil.

Watts Tested: 45Watt the flavour is great but a warmer vape with good clouds.

Watts Tested: 60Watt I would say this is the sweet spot for this coil as the flavour and cloud production is perfect for the single coil

Watts Tested: 75watt – Starts getting a little hot but flavour is good and fire rate is excellent.

MT-M2 (Preinstalled)

Resistance – 0.2Ohm

Type – Dual Mesh coil

Power Range – 55-85Watt

User Experience: Excellent flavour, good clouds and my preferred coil for this tank.

Watts Tested: 45Watt the flavour is less in your face but still good and not as warm.

Watts Tested: 60Watt the coil is just starting to hit that sweet spot where the vapour and flavour production is good.

Watts Tested: 75watt – here the coil is great for a super flavoured vape and most juices I tested were very sweet.

Extra Coil sent which im not sure if it will be included as part of the tank

MT-M3 (Extra)

Resistance – 0.19Ohm

Type – Triple Mesh Coil

Power Range – 65-85W

User Experience: Great flavour and a little bit more restrictive and likes more watts.

Watts Tested: 45Watt -

Watts Tested: 60Watt -

Watts Tested: 75watt –

So, what do I think about this tank? Good question!

Unboxing the tank and holding it in my hand it’s a solid piece of stainless steel which has been well machined. The ease in changing coils takes no less than a couple of seconds and there is no juice spilling. I removed the preinstalled MT-M2 coil and primed it up and installed back into the tank and waited a minute after filling her up with juice and she was vaping like a train. This Tank provides excellent flavour and decent clouds! The preinstalled bubble glass holds 4ml of juice which gives you a good amount of vaping as the coil isn’t too heavy on juice! The airflow adjustment is smooth and can close all the way to MTL style draw. There is no airflow whistle which is great. I do find that once the tank juice level starts reaching the very bottom then you don’t get as much flavour and have experienced one or two close dry hits even though they state that this tank has a juice well to stop this from happening. One thing that impressed me is how quick you taste another juice if you change from one to another. Perhaps two draws, then the new flavour is in. Peeking through the mouth piece the coils are always completely wet with juice even after a long drag.

The MAAT Tank is the first patented tank according to Voopoo with its middle adjustable airflow system and coil system which I find is a great design.

My Pro's

-Super easy juice filling with a press of a button, no need to unscrew the top cap.

-Excellent flavour on all 3 coils but prefer the MT-M2 for its draw and flavour.

-Smooth draw and a little restrictive (Not much)

-Easy and spill free coil replacement while the tank is full of juice, takes about 10 seconds once the tank is off.

-Replace a coil without having to unscrew the tank!

-No dry hits even at 90watts and chain vaping

-No whistling no matter how the airflow is set

-Unique middle airflow which assists with flavour and draw.

My Cons's

-Filling juice with a chubby gorilla is annoying, the top cap doesn’t move enough, and the bottle ends up going into the fill hole skew against the mouth piece

-Its heavy at 76g – weighs half of what the DRAG 2 Platinum weighs

-The tank can get quite hot if you vape a lot.

-Draw is a little tight even all the way open, Similar to my Zeus Dual draw. Would have preferred a more open draw with the airflow fully open but that’s just me.

-Filling is spilling – if you aren’t careful, you will end up overflowing as the tank almost creates and airlock if juice blocks the fill hole and ends up pushing out. Picture below. This has happened several times.

Filling Up on Juice:

This is super easy, Push the button and the top cap flips open as its spring loaded, fill the juice and flip it back until you hear it click back into place using a pin style function to swivel and lock.

Took me a couple of seconds to figure out how to open it as the little button to open the tank blends in with the top cap, had to laugh at myself after had to read the manual! LOL

Here’s a little picture from VooPoo’s website:

The following Colours are available:

So would I buy one? Absobloodylutely!!! I doubt that there is a Sub ohm tank out there with this type of flavour and ease of use!

Thanks for reading my review on the Voopoo MAAT Subohm tank